Chapter 20: Fcc/Ic Dfs Considerations; Fcc 5.4Ghz Device Registration; Registering The Device - Radwin 5000 HPMP User Manual

5000 series point to multipoint broadband wireless
Hide thumbs Also See for 5000 HPMP:
Table of Contents

Advertisement

Chapter 20:
FCC/IC DFS Considerations
FCC 5.4GHz Device Registration
The FCC requires that devices installed within 35 km of any TDWR location should be 
registered in the voluntary WISPA sponsored database.
The FCC has published a TDWR Location Information table that lists the exact location of all 
TDWR towers (see Table
1. When installing a 5.4 GHz device define your exact location (latitude and longitude)
2.  Use the TDWR Location Information table to determine if the distance between 
the device and any TDWR tower is less than 35 km.
3. If the distance is less than 35 km then register the device in the voluntary WISPA 
sponsored database (following section)
4. Disable the frequencies between 5570 – 5680 MHz from the available channels 
list.
5. The frequency range between 5.600 to 5.650 GHz is not included in the available 
channels list.
Registering the Device
To register a device:
1. Enter the website http://www.spectrumbridge.com/udia/home.aspx and follow the 
instructions.
At your first entry into the site, you will be required to register as a user:
RADWIN 5000 HPMP User Manual
20‐1 at the end of the chapter).
Release 3.5.70
20‐1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents