Two Ways To Run Spectrum View; Where Is The Spectrum View Data Stored; Spectrum View Main Window: Hbs - Radwin 5000 HPMP User Manual

Two Ways to Run Spectrum View
Two Ways to Run Spectrum View
Spectrum View may be run from the HBS in which case you have a choice of analyzing all sites
in the sector in one run, or making a selection.
Spectrum View may also be run on a managing computer directly connected to an HSU.
Remember that in such a case the results will be quite different if the HSU is part of a sector
(registered or not) or if it is completely stand‐alone, for example using a different spectral
range and operating Band from the HBS. In the former case, expect a "noise hump" around
the channels used by the sector, due to the duty signals from the HBS.
Where is the Spectrum View Data stored
Spectrum View data is always stored in the ODU originating the analysis. The HBS maintains
the last Spectrum View analysis data for all members of the sector. If you run Spectrum View
from a directly connected HSU, it stores its own data, which may be quite different from the
analysis obtained for the same HSU from the HBS.
Spectrum View Main Window: HBS
In this section we review the main window management controls.
Click the Spectrum View button
mode:
RADWIN 5000 HPMP User Manual
. The Spectrum View main window opens in full screen
Release 3.5.70 24‐2