Management
Conversely, If the Telnet or Web Interface access modes pose a general security risk, you must
disable them for each sector member separately.
Multiuser Support under SNMPv3
If you chose SNMPv3 or both versions, you are asked to log on again:
For the first log‐on under SNMPv3, use as password, the User Name, admin. There is one
change to the main window. The title bar now shows the SNMPCv3 user name:
Further, there is an additional button, SNMPv3 Users, in the Management window:
RADWIN 5000 HPMP User Manual
Release 3.5.70
8‐11