The Radwin Manager Log-On Concept; Figure 5-3 Log On Window -Ipv; Figure 5-4 Log - On Window - Ip - Radwin 5000 HPMP User Manual

The RADWIN Manager Log‐on Concept
Figure 5‐3: Log‐on window ‐IPv4
Figure 5‐4: Log‐on window ‐ IPv6
The RADWIN Manager Log‐on Concept
RADWIN 5000 supports SNMPv1 and SNMPv3 either separately or together. The log‐on
procedure differs slightly between operation under SNMPv1 and SNMPv3. In what follows
below, we assume that SNMPv1 is in use. In Table
difference between SNMPv1 and SNMPv3 at log‐on time.
The RADWIN Manager provides three levels of access in one of two entry modes. To see
them, click Options at any time in the Log on window (Figure
extended log‐on window:
RADWIN 5000 HPMP User Manual
5‐6 at end of the section, we show the
5‐3 above). You are offered an
Release 3.5.70 5‐8