Radwin 5000 HPMP User Manual page 34

RF Planning for Dense Installations and Collocated Sites
• If one or more collocated units are not RADWIN units, ensure that there is a physical
separation of at least three meters between a RADWIN unit and any other collocated
radio on the site.
• Use the largest possible frequency gap between these units
• Choose the best frequency channel (as clear as possible from interference). You may be
able to change the band used for the sector ‐ depending on HBS model and regulations.
• Decreasing the Tx Power of a sector will reduce collocation interference
Use the Link Budget Calculator to determine the minimum Tx Power
required to maintain sector stability.
Note
RADWIN 5000 HPMP User Manual Release 3.5.70 3‐5