Advanced: False Radar Mitigation for HBS
License Activation
You may add additional bands or capacity using the license Activation facility. Additional
bands (if available) are obtained using the Change Band function, described below. Capacity
upgrade is described in Chapter 22.
For a single band, just enter the supplied license Key and click Activate. If you have a list of
them (a text file) you will need to use the License File option.
In some instances it may involve purchasing the relevant license from RADWIN. You should
contact Customer Service for details. You will find the technical steps required to obtain and
install extra bands on page
Advanced: False Radar Mitigation for HBS
This tab is only visible if
•
You are using a Regulation requiring Radar Channel Avoidance and
•
You are logged on as Installer
For this release, this feature at the HBS, is only relevant to the 5.3 GHz ETSI band.
Configuration of False Radar Mitigation is covered in Chapter 19.
HSU Connection Table
From the HBS button bar, click the right hand button followed by HSU Connection Table.
The following table is displayed:
RADWIN 5000 HPMP User Manual
8‐51.
Release 3.5.70
8‐30