Saving The Hbs Settings For Reuse As A Template; Creating A Sector From An Hbs Template - Radwin 5000 HPMP User Manual

Saving the HBS Settings for Reuse as a Template
The allocated percentage of uplink time slots has increased from 29% to 38%.
Saving the HBS Settings for Reuse as a
Template
Refer to Figure 11‐2 of which the following is an excerpt:
Following any further fine tuning, open up the HBS Mobility tab, and click Save. You are
offered the standard Save File dialog. Save the HBS Mobility settings file
(MobilitySettings.mob) to a convenient location.
Creating a Sector from an HBS Template
The saved settings file may be used as a template for further sectors.

To create a sector from a HBS Mobility settings file:
1. Starting with a new HBS and HSUs, log on to the HBS.
2. Activate the HBS in the usual way.
3. Open the Mobility tab in the Configuration window. In the Save / Upload Settings
window, click Upload.
RADWIN 5000 HPMP User Manual Release 3.5.70 11‐15