Air Interface
For a registered HSU this window is for information only. For an unregistered or
unsynchronized fixed HSU, the Sector ID field will be blank or the last Sector ID used and
editable and the Channel Bandwidth field will be set to default and active:
Figure 9‐5: HSU Config. ‐ Air Interface for stand‐alone fixed HSU
For a nomadic HSU or a HMU, the Air Interface display is different. First, the Sector ID is
replaced by the Network ID. For a registered HSU, neither the Network ID or CBW can be
touched:
Figure 9‐6: HSU Config. ‐ Air Interface, registered nomadic HSU or HMU
For an unregistered or unsynchronized HSU, you may edit both of these fields:
Figure 9‐7: HSU Config. ‐ Air Interface, stand‐alone nomadic HSU or HMU
Use this feature to switch a nomadic HSU or HMU to a different network.
RADWIN 5000 HPMP User Manual
Release 3.5.70
9‐5