Radwin 5000 HPMP User Manual page 117

Default RADWIN 5000 HPMP Settings
For convenience, we repeat the tables of parameters used in our demonstration sector.
Parameters not listed are left at their default values:
Table 6‐2: Preconfigured setup ‐ HBS
Location Attribute
Address
IPv4 Net Mask
Default Gateway
Address
IPv6 Subnet Prefix Length
Default Gateway
Sector ID
Network ID
Protocol
Contact
HBS.01
Name
Band
Channel Bandwidth
Unit Serial Number
Geographic location
Latitude
Longitude
Azimuth (deg)
Beam width (deg)
Antenna height (m)
RADWIN 5000 HPMP User Manual
Value Remark
10.104.50.200
255.255.0.0
10.104.10.21
All communicating HSUs and HBS in the same
subnet
2005:104:50::200
32
2005:104:20::21
EBGX20560334 Inherited by all communicating fixed HSUs.
EBX Inherited by all communicating nomadic
SNMPv1 Can be set to SNMPv3 or both v1 and v3
Bach Optional
Bach@HBS.01 Location of Contact ‐ optional
5.730 ‐ 5.845 GHz FCC/IC Inherited by all communicating HSUs
20MHz Inherited by all communicating HSUs
PET540E000A00000
‐37.8148
144.9630
0
Used for initial default placement of HSUs
90
130 From RF plan, not used
Release 3.5.70 6‐5