Figure 4-7 G B E P Oedevice; Figure 4-8 Ruggedized Dc-P O E Device - Radwin 5000 HPMP User Manual

Power over Ethernet (PoE) Devices
Power over Ethernet (PoE) Devices
Figure 4‐7: GbE PoE device
Figure 4‐8: Ruggedized DC‐PoE Device
IDU‐H aggregation unit
The IDU‐H provides aggregation for multiple RADWIN ODUs and HBSs at a single hub site. It
supports all RADWIN ODUs and features ‐
• Six PoE ports (PoE legacy mode / RADWIN PoE)
• Up to 25W per PoE port
• Two LAN Interfaces 10/100/1000 Mbps; auto‐negotiation
• SFP Interfaces: 2 x SFP ports of 1000 Mbps (standard MSA)
The IDU‐H is a 19" rack mounted, 1U and half width unit. Power feeding is 44VDC ‐ 56VDC,
Dual redundant inputs through standard IDU‐C type adapters.
RADWIN 5000 HPMP User Manual
RADWIN's Gigabit Power over Ethernet
(GbE PoE) device provides data and
power to RADWIN 5000 outdoor units.
The PoE device is available with a
variety of AC cables offering various
plug types.
This is the recommended PoE device for
use with HBSs and HSUs.
The unit comes with a VAC cable. The
cable length and plug are region
dependent.
The Outdoor (Ruggedized) DC PoE device may be used for
both the HBS and the HSUs. It does not support Gigabit
performance on the HBS. Two models are available using
power input of 20 to 60 VDC or 10 to 30 VDC. The unit can be
installed in a vehicle using respectively 24VDC or 12VDC
power circuits.
Release 3.5.70 4‐6