Tools Required For Installation; Figure 4-21 Using An Ethernet Repeater With Lightning Protectors - Radwin 5000 HPMP User Manual

Tools required for installation
Ethernet cable Repeater
The RADWIN Ethernet repeater enables you to extend the PoE to ODU cable beyond the
100m limit (but no more than 200m). The unit is similar in appearance to the lightning
protection device in Figure
Figure 4‐21: Using an Ethernet repeater with lightning protectors
The Ethernet repeater cannot be used with GbE IDU‐ODU cables.
Note
Tools required for installation
The following is a list of the equipment and materials required to install RADWIN 5000 HPMP
hardware.
Tools and Materials
• Crimping tool for RJ‐45 (if the ODU‐PoE cable is without connectors)
• Spanner/wrench 13 mm (½")
• Drill (for wall mounting only)
RADWIN 5000 HPMP User Manual
4‐20. Its use is very simple as shown in the following schematic:
Release 3.5.70 4‐12