Installing Collocated HSSoE ODUs
By default, the VLAN ID 1997 and priority 7 are reserved for HSS. You may change the VLAN ID
but not the priority.
Installing Collocated HSSoE ODUs
Ethernet Services Only
Use an IDU‐H for the collocated ODUs instead of separate PoE devices. The IDU‐H has two
LAN ports, one of which will be connected to a switch.
Ethernet and TDM Services
For RADWIN 2000 class ODUs: To attain Layer 2 connectivity for up to two such ODUs, you
should connect one of the two the IDU‐C (or IDU‐E) LAN ports to the IDU‐H LAN ports. You
may use the second IDU‐C (or IDU‐E) LAN port to connect to a switch. As pointed out earlier,
you may only collocate two ODUs in this way.
Link Configuration and HSSoE
Setup for Illustration
We will show how to set up our demonstration link from Managing the Sector as HSM and
HSC in turn. (The second collocated link is a RADWIN 2000 SCB, the setup details of which,
need not concern us).
Configuring the HBS as an HSM
To configure the Master ODU as EHSS Master:
1. Log on to the HBS.
2. Open the Configure | Hub Site Sync tab.
RADWIN 5000 HPMP User Manual
Release 3.5.70
15‐3