Radwin Manager Traps - Radwin 5000 HPMP User Manual

RADWIN Manager Traps
Ethernet service, there is throughput degradation in case of interference. The degradation is
proportional to the BBER.
Ethernet Thresholds ‐ Capacity
This is used as a basis for checking adherence to a Service Level Agreement. It is the number
of seconds count that the link capacity falls bellow the threshold.
Ethernet Thresholds ‐ Traffic
The number of seconds count that received traffic exceeded this threshold. It can be used to
measure traffic peaks.
RADWIN Manager Traps
The RADWIN Manager application issues traps to indicate various events, displayed in the
Events Log.
Table 12‐4: RADWIN Manager Trap Messages
Trap Message
Cannot bind to trap service port. Port
162 already in use by ProcessName
(pid: ProcessId)
Device unreachable!
Connected to <site_name>
<site_name> Site will be reset.
Restore Factory Default Settings in
process on Site <site_name>
Factory Settings: The process was not
finished due to connection issues.
Reset: The process was not finished
due to connection issues.
Cannot Write to Monitor file. There is
not enough space on the disk.
Windows Error: <error_ID>. Cannot
Write to Monitor file.
Identical IP addresses at
<local_site_name> and
<remote_site_name>
The Product is not identified at the
<local_site_name> site.
RADWIN 5000 HPMP User Manual
Severity Remarks
Warning RADWIN Manager will not catch any
traps from the ODU, some other
application has grabbed this port.
Error Check connectivity to ODU
Information
Information
Information
Warning Factory setting failed due to
connectivity problem to ODU
Warning Factory setting failed due to
connectivity problem to target ‐ ODU
will not be reset
Warning Free some space on disk on the
managing computer and retry
Warning Operating System error on the
managing computer
Warning Set up a different IP to each site
Warning RADWIN Manager is incompatible
with the ODU software version
Release 3.5.70 12‐16