Changing the Sector Band
7. Click OK. A sector re‐sync follows. Here is the final result:
Having set the channel bandwidth and operating channels earlier, there is no need
for deactivation and reactivation.
You may also add new Bands by clicking the Add Bands button. There are several provisos to
this:
•
Additional Bands must be available for your hardware
•
Such additional Bands must be available within the framework of your local regulations
The foregoing applies to both regulated and unregulated Bands.
To obtain and install additional bands:
1. Make a list of ODU serial numbers for all HBSs and all HSUs to receive additional
bands. The list should be a simple text file, one serial number per line. (The serial
numbers are located on the stickers on the ODUs.)
2. As Installer, open the window of Figure
following instruction panel is displayed:
RADWIN 5000 HPMP User Manual
8‐22 above, and click Add Bands. The
Release 3.5.70
8‐51