Radwin 5000 HPMP User Manual page 163

Management
Trap Destinations

To change a trap IP address:
1. Open an entry with its edit button:
The following entry window is displayed:
2. Enter the Trap Destination IP Address and Port. It could be the IP address of the
managing computer. The events log will be stored at the addresses chosen.
3. For Security model you may choose between SNMPv1 or SNMPv3. The choice is site
dependent. If you choose SNMPv1, you may only enter an IP address and port
number. For SNMPv3, you should supply a user name and password:
RADWIN 5000 HPMP User Manual Release 3.5.70 8‐8