Radwin 5000 HPMP User Manual page 457

Private MIB Parameters
Table C‐2: Private MIB Parameters ‐ HBS (Sheet 33 of 33)
Name
winlink1000HsuAirAlignmentLastRe
portMcsIndexDown
winlink1000HsuAirAlignmentLastRe
portState
winlink1000HsuServiceCommandSt
r
winlink1000HsuServiceHsuType
winlink1000HsuServiceHsuLevel
winlink1000HsuEthernetPoESuppor
ted
winlink1000HsuEthernetPoETempe
rature
winlink1000HsuEthernetPoEEquCo
nsumption
winlink1000HsuEthernetPoEEquVol
tage
winlink1000GeneralTrapDescription 1.3.6.1.4.1.4458.1000.100.1 DisplayString
winlink1000GeneralTrapSeverity
winlink1000GeneralCookie
winlink1000GeneralEcChangesCoun
ter
winlink1000GeneralTelnetSupport
winlink1000GeneralWISupport
winlink1000GeneralSNMPSupport
RADWIN 5000 HPMP User Manual
OID Type
1.3.6.1.4.1.4458.1000.100.2 Integer
1.3.6.1.4.1.4458.1000.100.3 DisplayString
1.3.6.1.4.1.4458.1000.100.4 Integer
1.3.6.1.4.1.4458.1000.100.5 Integer
1.3.6.1.4.1.4458.1000.100.6 Integer
1.3.6.1.4.1.4458.1000.100.7 Integer
Release 3.5.70
Description
RO MCS index of the link in the downlink direction.
RO State of the Evaluation 1 Finished successfully
2 Partial Evaluation (Timeout Exceeded) 3
Evaluation Aborted (Timeout Exceeded) 4
Evaluation aborted (Unstable Antenna) 5
Evaluation aborted (Sync Lost) 6 Evaluation
aborted (External command) 7 Evaluating.
RW Ability to perform special command in the HSU.
Format (string): Operation Param1 Param2 ....|
ParamN.
RW HSU type (1 = Fixed 2 = Stationary 3 = Mobile 4
= Transport)
RW HSU level (1 .. 4)
RO Indicated if this HSU has special port for PoE
devices.
RO Holds the temperature (Celsius) of the POE
component.
RO Holds the consumption of the connected
equipment (milliampere).
RO Holds the voltage of the connected equipment
(Volt).
RO Trap's Description. Used for Trap parameters.
RO Trap's Severity. Used for Trap parameters.
RW Reserved for the Manager application provided
with the product used for saving user
preferences affecting ODU operation.
RO This counter is initialized to 0 after a device
reset and is incremented upon each element
constant write operation via SNMP or Telnet.
RW Enable/Disable Telnet protocol.
RW Enable/Disable Web Interface protocol.
Mandatory Disabled ‐ No option to enable the
feature. Mandatory Enabled ‐ No option to
disable the feature.
RW Enable/Disable SNMP protocols
C‐38