Registering Hmus - Radwin 5000 HPMP User Manual

Registering HMUs
Registering HMUs
Registration of actual HMUs is accomplished by direct connection. You assign each one to one
of the four levels. At the same time, you may configure other parameters such as Air
Interface, IP address (though not strictly necessary). The process is slightly different for
VMUs.

To assign a HMU to a level by direct connection:
1. Log on to a HMU in the usual way. Here is the opening window:
For the VMU, the window is different:
RADWIN 5000 HPMP User Manual Release 3.5.70 11‐6