Installing the Base Station
Figure 4‐25: Flat panel antenna mounting kit adapter
It is mounted on a pole in the same manner as the HBS itself using the adapter shown in
Figure
4‐25. The left hand view in shows the knurled surface adjacent to the mounting kit ear.
The right hand view shows the recess for the mounting kit holding nut.
Figure 4‐26: Flat Panel antenna ‐ rear with mounting kit adapter
Grounding an HBS external antenna
External antennas should be individually grounded using a suitable Grounding Kit such as an
Andrew Type 223158‐2 (http://www.commscope.com).
Grounding the HBS
There is a grounding lug on the rear of the HBS as shown in Figure
using 10 AWG wire. Grounding is often carried out in conjunction with lightning protection.
RADWIN 5000 HPMP User Manual
Release 3.5.70
4‐27. Connect it to ground
4‐18