Radwin 5000 HPMP User Manual page 160

Hub Site Sync [HSS]
Hub Site Sync [HSS]
The External Pulses which might be detected, may come from a collocated HBS, a RADWIN
2000 ODU or a RADWIN GSU configured as Hub Sync Master. To enable HSS, check the
Enabled check box.
Ensure that the correct Operational state is selected ‐ in our example, Hub Site Client ‐
Continue Tx. Click Apply or OK to enable HSS.
HSS support for RADWIN 5000 HBSs is model dependent
Note
RADWIN 5000 HPMP User Manual Release 3.5.70 8‐5