Configuring an HSU from the HBS Main Window
Figure 8‐17: HSU Intercommunication ‐ Connection Table
The green shaded squares show intercommunicating elements within the sector. MNG refers
to management traffic which should always be open between HSUs and the HBS. LAN refers
to service traffic between the HBS and the HSUs. As shown, the two HSUs may not
communicate between themselves. Clicking the top white square would enable
communication (via the HBS) between them.
You may in fact disable all traffic between the HBS and the HSUs and restore it using this
device.
Configuring an HSU from the HBS Main
Window
Right click an HSU for its context menu and click Configure to open the HSU Configuration
window.
Configuration Menu Buttons
RADWIN 5000 HPMP User Manual
Release 3.5.70
8‐31