Figure 10-20 Sector Utilization - Radwin 5000 HPMP User Manual

5000 series point to multipoint broadband wireless
Hide thumbs Also See for 5000 HPMP:
Table of Contents

Advertisement

Example 4
Figure 10‐19: HSU Utilization ‐ Sector Relative time line ‐ Example 4
The left hand bar graphs for each section are instructive. Here first, is Sector Utilization:
Figure 10‐20: Sector Utilization ‐ Example 4
The downlink results reflect both the actual traffic and HBS monitoring of all the HSUs. The 
uplink figures reflect the same thing. Despite there being more than adequate free uplink 
time slots, the HBS overhead of taking care of inactive HSUs is noticeable.
Here is HSU self‐relative utilization:
Figure 10‐21: HSU Utilization ‐ HSU Relative ‐ Example 4
The percentage utilization here is very high ‐ significantly more so than Example 1. The actual 
traffic throughputs to the busy HSU are slightly lower ‐ for the same overhead reasons.
Similar considerations are reflected in the HSUs sector relative utilization:
RADWIN 5000 HPMP User Manual
Release  3.5.70
10‐17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents