Radwin 5000 HPMP User Manual page 60

Installing Fixed Subscriber Units
IDU‐H ‐ Functional Overview
Figure 4‐35: IDU‐H front panel
The front panel is very straight forward: The SFP ports are standard. The LAN ports are
Ethernet and support GbE. The six ODU WAN ports function identically to the LAN‐Out port
on a PoE device.
The IDU‐H LEDs
Table 4‐2: IDU‐H LED Indicators
Port
WAN (2xRJ45 LEDs)
LAN (2xRJ45 LEDs)
SFP (2 panel mounted LEDs)
Installing Fixed Subscriber Units
The same considerations as for an HBS hold for the HSUs.
•
•
•
Note
•
Mounting an HSU external antenna
Many of the antennas of the types shown in Figure 4‐14 to Figure
mounting kit. Some third party antennas use pole clamps, similar to those shown below:
RADWIN 5000 HPMP User Manual
Green
Link / Activity
Link / Activity
Link / Activity
When mounting an HSU on a pole or wall, ensure that the unit is ori‐
ented so that the cable connectors are at the bottom.
Do not mount an HSU horizontally
For an HSU with an integrated antenna: Do not tighten the HSUto its
mounting bracket until the antenna alignment process is complete.
Ensure that there are no direct obstructions in front of the HSU or
interference from man‐made obstacles.
Release 3.5.70
Yellow
Duplex or Port's PoE status (configurable)
Duplex
Duplex
4‐16 use the standard
4‐26