Managing the HBS over the Air from an HSU
•
The outer tag has to be the Provider's tag (so the frame is not filtered)
•
The internal tag has to be management VLAN ID
To avoid mix‐ups, best practice is to:
•
Separate the management and data ports
•
Define only a data port with Provider function
Managing the HBS over the Air from an HSU
If traffic VLAN tagging is in force for the HSU ingress direction and management VLAN is in use
at the HBS, then the VLAN ID at the HSU ingress direction must be the same as the VLAN ID
for management at the HBS.
Configuration of VLAN Tagging for Ethernet Service
VLAN configuration is carried out per HSU. It is up to you to ensure consistency between the
HSUs.
HSU VLAN tagging can only be configured from one of the HSU views from the HBS. You can
not log on to an HSU directly and do it from the HSU main window. The reason is that the HSU
maintains the HSU tagging information in its internal per HSU configuration record.
To set up an HSU for VLAN tagging:
1. Right click an HSU on the HBS window, and then click Configure | Ethernet | VLAN
Configuration. The VLAN Configuration window is displayed:
RADWIN 5000 HPMP User Manual
Release 3.5.70
18‐7