Sync Status Messages And Color Codes; Figure 14-7 Setting Hbs As; Figure 14-8 Hbs As - Radwin 5000 HPMP User Manual

Sync Status Messages and Color Codes
Figure 14‐7: Setting HBS as HSM or HSC
Continue Tx means that the HBS as a client to continue to work if there is no HSM pulse.
If you select Hub Sync Master and click Apply, the display changes again:
Figure 14‐8: HBS as HSM
Setting up the HBS as a client is carried out in a similar manner.
Sync Status Messages and Color Codes
The possible External Pulses conditions are shown in the following table:
RADWIN 5000 HPMP User Manual Release 3.5.70 14‐7