Radwin 5000 HPMP User Manual page 130

The Initial RADWIN Manager Main Window
having fully configured the sector you would disable all but the actual operating
channel.
For operation using Licensed 3.X bands under FCC part 90 subpart Z and IC
RSS‐197 supporting 3.650‐3.700 GHz: The HBS does not commence any
type of transmission until the Activation process is completed, in
Note
compliance with those regulations.
11. Click Next. The Antenna type and Tx Power window is presented:
The choice of Tx Power, antenna gain and cable loss (between the radio and the
antenna) determines the EIRP and is affected by such considerations as radio limita‐
tions and regulatory restrictions.
Before completing antenna installation, you might like to consider the background
information about setting antenna parameters, in Appendix E:
When setting Required Tx Power, it is your responsibility to chose a value in
compliance with your local regulations.
Warning
Choose your Antenna Type, Required Tx Power, Antenna Gain and Cable Loss. We
will set Required Tx Power to 5 dBm for our example. Click Next.
12. The Summary window of the Wizard is displayed.
RADWIN 5000 HPMP User Manual Release 3.5.70 6‐18