HSU
Figure 12‐12: HSU ‐ Performance Monitoring ‐ Valid and invalid data (3 of 3)
The HSU report contains many more fields than the HBS. Here is their meaning::
Table 12‐3: HSU Performance Monitoring Fields
Abbreviation
Column Heading
Meaning
Integrity
Valid data flag
Date & Time
Time stamp
Unavailable
UAS
Seconds
Errored
ES
seconds
Severe Errored
SES
Seconds
Background
BBE
Block Error
Min RSL (dBm)
Max RSL (dBm)
RSL Thresh 1 (‐
88dBm)
RADWIN 5000 HPMP User Manual
Description
Green tick for current and valid; Red cross for
invalidated data (See example below). Note that the
Performance Monitoring data is not valid if not all the
values were stored (e.g., due to clock changes within
the interval or power up reset)
Data are recorded every 15 minutes; the last 30 days of
recordings are maintained. Roll‐over is at midnight
Seconds in which the interface was out of service
The number of seconds in which there was at least one
error block.
The number of seconds in which the service quality
was low as determined by the BBER threshold
The number of errored blocks in an interval
The minimum of the receive signal level (measured in
dBm)
The maximum of the receive signal level (measured in
dBm)
The number of seconds in which the Receive Signal
Level (RSL) was below the specified threshold.
Release 3.5.70
12‐14