MIB Traps
Table C‐4: MIB Traps (Sheet 4 of 8)
Name
externalAlarmInPort4Alarm
swVersionsMismatchFullCompatibilityAlarm
swVersionsMismatchRestrictedCompatibilityAlarm
swVersionsMismatchSoftwareUpgradeRequired
swVersionsIncompatible
hssMultipleSourcesDetectedAlarm
hssSyncToProperSourceStoppedAlarm
hssSyncPulseDetectedAlarm
tdmBackupAlarm
linkLockUnauthorizedRemoteODU
linkLockUnauthorizedODU
hotStandbyAlarm
sfpInsertion
sfpPort1DisconnectedAlarm
ringRplStateActiveAlarm
desiredRatioCanNotBeAppliedAlarm
cbwMismatch
gpsNotSynchronized
RADWIN 5000 HPMP User Manual
ID
Severity
Description
113
major
The trap is sent every time an alarm occurs in the
External Alarm Input of port #4. Contains a single
parameter which is its description: 1 ‐ Description:
External Alarm 4 ‐ <User Text> ‐ Alarm.
114
warning
The trap is sent if SW versions mismatch with full link
functionality. Contains a single parameter which is its
description: 1 ‐ Description: Software versions
mismatch ‐ full link functionality
115
minor
The trap is sent if SW versions mismatch with restricted
link functionality. Contains a single parameter which is
its description: 1 ‐ Description: Software versions
mismatch ‐ restricted link functionality
116
major
The trap is sent if SW versions mismatch and SW
upgrade is required. Contains a single parameter
which is its description: 1 ‐ Description: Software
versions mismatch ‐ Software upgrade required
117
critical
The trap is sent if SW versions are incompatible.
Contains a single parameter which is its description: 1 ‐
Description: SW Versions incompatible
118
major
Indicates that multiple sync pulse sources were
detected. Contains a single parameter which is its
description: 1 ‐ Description: HSS multiple sync sources
were detected.
119
major
Indicates that synchronization to a proper sync pulse
source was stopped. Contains a single parameter
which is its description: 1 ‐ Description: HSS sync pulse
‐ Down. The reason is: %s. %s ‐ Is the reason for the
sync down.
120
major
Indicates that HSS additional sync pulse was detected.
Contains a single parameter which is its description: 1 ‐
Description: HSS additional sync pulse was detected.
121
major
Indicates that the TDM backup link was activated.
Contains a single parameter which is its description: 1 ‐
Description: TDM backup alarm ‐ backup link was
activated.
122
major
Indicates that the remote ODU is unauthorized.
Contains a single parameter which is its description: 1 ‐
Description: Unauthorized remote ODU connection
rejected.
123
major
Indicates that the ODU is unauthorized. Contains a
single parameter which is its description: 1 ‐
Description: Unauthorized ODU connection rejected.
124
major
Indicates that the hot standby secondary link was
activated. Contains a single parameter which is its
description: 1 ‐ Description: Secondary Link Is Active.
126
normal
Indicates that a device was inserted to SFP Port
127
major
Indicates the SFP port 1 status changed to
disconnected.Contains a single parameter which is its
description: 1 ‐ Description: SFP port 1 status changed
to disconnected.
128
major
RPL state changed to Active.
129
normal
Indicates Desired UL/DL RAtio Can Not Be Applied.
130
major
Indicates that a Channel Bandwidth mismatch was
detected.Contains two parameters: 1 ‐ Description:
Channel Bandwidth Mismatch: one side is %n0 MHz and
the other is %n1 MHz. %n0 is the local Channel
Bandwidth value in MHz. %n1 is the remoet Channel
Bandwidth value in MHz.
131
major
Indicates that the GPS is not synchronized with
satellites. Pulses are self generated.
Release 3.5.70
C‐75