Deregistering An Hsu; Where Has My Hsu Gone; Saving The Hbs Settings For Reuse As A Template; Creating Nomadic Entries For A Sector From A Hbs Template - Radwin 5000 HPMP User Manual

Deregistering an HSU
Deregistering an HSU
A HSU may be deregistered by using the Deregister entry in an HSU context menu or using the
button from an HSU button bar.
Where has my HSU gone?
Suppose that you installed two collocated HBSs with contiguous sectors. It is possible that an
HSU located close to the common sector boundary may "discover" the wrong HBS. A HSU can
be "forced" across to another HBS by changing its Sector ID to that of the required HBS. The
method for doing this is covered in Chapter 9.
Saving the HBS Settings for Reuse as a
Template
Refer to Figure 6‐9 of which the following is an excerpt:
Following any further fine tuning, open up the HBS Nomadic tab, and click Save. You are
offered the standard Save File dialog. Save the HBS Nomadic settings file
(MobilitySettings.mob) to a convenient location. For our example we changed the file name
to NomadicSettings.mob.
Creating Nomadic Entries for a Sector from a
HBS Template
The saved settings file may be used as a template for further sectors.

To create a sector from a HBS Nomadic settings file:
1. Starting with a new HBS and HSUs, log on to the HBS.
2. Activate the HBS in the usual way.
3. Open the Nomadic tab in the Configuration window. In the Save / Upload Settings
window, click Upload.*
RADWIN 5000 HPMP User Manual Release 3.5.70 6‐37