Checking The Gps - Radwin 5000 HPMP User Manual

Confirming the Pre‐Configuration
Your browser may become inactive, since there is no longer an over‐the‐air connection.
Confirming the Pre‐Configuration
To confirm our work so far, we must connect the VMU unit to a DHCP server, and then access
each of the VAPs from a remote laptop.
Checking the GPS
The front panel of the VMU has a GPS status LED. The GPS unit is functioning correctly when
the LED is steady green. Other conditions are as follows:
Table 11‐1: GPS Status LEDs
LED Status GPS Status
Red Disconnected
Amber Connected, no satellites available (usually when indoors)
Green, blinking Connected, searching
Green Connected, satellite found
The GPS data are displayed on the VMU main window status area:
The GPS data may also be viewed in the VMU Web Interface, which in addition, offers a
Google Earth map centered on the current location. See WEB Interface for VMUs.
RADWIN 5000 HPMP User Manual Release 3.5.70 11‐27