Radwin 5000 HPMP User Manual page 283

HSU
Table 12‐2: HBS Performance Monitoring Fields (Continued)
Abbreviation
Column Heading
Meaning
Background
BBE
Block Error
Received
Rx MBytes
Mbytes
Transmitted
Tx MBytes
Mbytes
Above Traffic Threshold set in
Thresh Figure 12‐7
Active Seconds
Data becomes invalidated following a reset. In the example below, the HBS was reset shortly
after 11:00. All data prior to that time becomes invalidated. The only valid item is the first
recording after re‐sync.
Figure 12‐9: HBS ‐ Performance Monitoring report ‐ Showing invalid data
Use the Save button to store the current data to file and the Clear button to delete currently
stored performance data.
HSU
The Performance Monitoring window for the HSU is slightly different depending on whether
you access it from the HBS or directly:
From the HBS
RADWIN 5000 HPMP User Manual
Description
The number of errored blocks in an interval.
The number of Megabytes received at the specified
port within the interval
The number of Megabytes transmitted at the
specified port within the interval.
Seconds count when actual traffic exceeded the
threshold
The number of seconds that the configured Ethernet
service is active
Release 3.5.70 12‐12