Silent Monitor And Barge In - HP FlexNetwork MSR Series Configuration Manual

Silent monitor and barge in

Network requirements
•
Configure silent monitor for Telephone C to monitor the conversation between Telephone A and
Telephone B.
As shown in
code *425*Number of Telephone A# at Telephone C to monitor the conversation between
Telephone A and Telephone B.
•
Configure barge in for Telephone C to participate the conversation between Telephone A and
Telephone B.
Dial the feature code *428# at Telephone C to participate the conversation between Telephone
A and Telephone B.
Figure 81 Network diagram
Configuration procedure
1. Configure the VCX:
Open the Web interface of the VCX and select Central Management Console. Configure the
information of Telephone A, Telephone B, and Telephone C. The following takes Telephone A
as an example.
Figure 81, Telephone A and Telephone B are in a conversation. Dial the feature
260