Configuring Feature Service - HP FlexNetwork MSR Series Configuration Manual

Configuring door opening control
Step
1. Enter system view.
2. Enter voice subscriber line
view.
3. Enable the door opening
control service and set a
password for opening the
door and the door open
duration before the door
control relay locks the door.

Configuring Feature service

For the convenience of operation, VCX devices provide various features. Some of these features are
directly implemented through Feature messages and others are implemented through SIP
messages. All these features are implemented through exchange of special codes with VCX devices.
They are called Feature service.
After the system administrator enables the setting of the Feature service by using command lines,
you can dial some special codes on telephone terminals to implement these features. The setting of
the Feature service starts with an asterisk (*). After the setting is completed, you will hear the system
playing tones indicating whether the setting succeeds or fails.
Configuration prerequisites
The router is equipped with an FXS voice interface card.
Enabling and disabling Feature service setting by using keys
The device supports the Feature service configuration for the FXS voice subscriber line on telephone
terminals.
To enable and disable the setting of the Feature service:
Feature name
Silent Monitor
Barge In
Command
system-view
subscriber-line line-number
door-relay password [ simple |
cipher ] password [ time
seconds ]
Enable keys Disable keys
*425*destination# None
*428# None
245
Remarks
N/A
N/A
Optional.
Door opening control is disabled
by default.
Remarks
On the VCX, Telephone B has the right
to monitor Telephone A. When
Telephone A is in conversation,
Telephone B can dial the feature code
to monitor Telephone A, but Telephone
A does not know it is being monitored.
The feature is automatically disabled
upon on-hook.
During monitoring, the supervisor can
dial the feature code to optionally join a
conversation and place a three-party
conference call.
The feature is automatically disabled
upon on-hook.