Configuring An Ivr Voice Entity - HP FlexNetwork MSR Series Configuration Manual

Task
Creating an IVR node

Configuring an IVR voice entity

This section describes the procedures for creating and configuring an IVR voice entity.
Creating an IVR voice entity
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program view.
4. Create an IVR voice entity and
enter IVR voice entity view.
Configuring an IVR voice entity
To configure the root node:
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Create an IVR voice entity
and enter IVR voice entity
view.
5. Configure the root node,
that is, the first node of the
IVR voice entity.
To configure the commands for an IVR voice entity:
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
Configuring a Call node
Configuring a Jump node
Configuring a Service node
Command
system-view
voice-setup
dial-program
entity entity-number ivr
Command
system-view
voice-setup
dial-program
entity entity-number ivr
ivr-root node-id
Command
system-view
voice-setup
dial-program
286
Remarks
Required.
Use one of, two of or
all of the
configurations as
needed.
Remarks
N/A
N/A
N/A
By default, no IVR voice entity is
created.
Remarks
N/A
N/A
N/A
N/A
By default, no root node is
configured for an IVR voice entity.
Remarks
N/A
N/A
N/A