Displaying And Maintaining Mwi - HP FlexNetwork MSR Series Configuration Manual

Displaying and maintaining MWI

Task
Display the information of MWI.
Display subscription information.
Configuring three-party conference
The device offers two three-party conference configuration methods:
•
Subscribers configure the function by pressing keys on a telephone.
•
The system administrator configures the function through CLI on the device.
Configuration prerequisites
•
Install an FXS voice card on the device
•
Install a voice processing module (VPM) on the main board of the device
•
Enable the call hold function in the voice subscriber line of the conference control device
Enabling three-party conference by using keys
The device supports configuring the three-party conference function of the FXS voice subscriber line
through a telephone.
The three-party conference configuration performed on a telephone also takes effect on the device.
For example, after you configure three-party conference through a telephone, and then execute the
display this command in the corresponding subscriber line, you can see the corresponding
operation results.
The three-party conference function depends on the call hold function. Therefore, you need to
enable the call hold function before configuring three-party conference.
Enabling the three-party conference service in voice subscriber line view will invalidate the local call
identification function (if configured). For more information about the configuration of the local call
identification function, see the distinguish-localtalk command in HPE FlexNetwork MSR Router
Series Comware 5 Voice Command Reference.
To enable three-party conference by using keys:
Enable keys
*33#
Enabling three-party conference by using command lines
The three-party conference function depends on the call hold function. Therefore, you need to
enable the call hold function before configuring three-party conference.
Command
display voice ss mwi { all |
number number } [ | { begin |
exclude | include }
regular-expression ]
display voice sip
subscribe-state [ | { begin |
exclude | include }
regular-expression ]
Disable keys
#33#
242
Remarks
Available in any view.
Available in any view.