Defining A Radius Server; Defining A Tacacs+ Server; Using Snmp To Monitor Network Devices - HP ProCurve 7000dl Series Basic Management And Configuration Manual

Controlling Management Access to the ProCurve Secure Router
Quick Start
2-76
• If you have created a named list to track all connections, or logins, or
if you have created a named list to track outbound Telnet connections,
enter:
Syntax: accounting [connection | exec] [default | <named list>]
Include the connection option if you want to track all outbound
Telnet connections made from this line. Include the exec option if
you want to track all login connections made from this line.
Specify the default accounting list, or replace <named list> to create
an accounting list.

Defining a RADIUS Server

Define the IP address of the RADIUS server and the key that the ProCurve
Secure Router must use to authenticate to the server (if a key is required).
From the global configuration mode context, enter:
Syntax: radius-server host <A.B.C.D> key <key>
Replace <A.B.C.D> with the RADIUS server's IP address, and replace <key>
with the shared key for the RADIUS server.

Defining a TACACS+ Server

Define the IP address of the TACACS+ server and the key that the ProCurve
Secure Router must use to authenticate to the server (if a key is required).
From the global configuration mode context, enter:
Syntax: tacacs-server host <A.B.C.D> | hostname> <key>
Replace <A.B.C.D> with the server's IP address, or replace <hostname>
with the hostname of the TACACS+ server. Replace <key> with the shared
key.

Using SNMP to Monitor Network Devices

To configure SNMP, complete these steps:
1. Enable the SNMP agent.
Syntax: ip snmp agent
2. Create an SNMP view by entering the following command from the global
configuration mode context:
Syntax: snmp-server view <viewname> <oidtree> included | excluded