Configuring Call Authority Control - HP FlexNetwork MSR Series Configuration Manual

[RouterC-voice-dial-entity1001] send-number all
[RouterC-voice-dial] entity1002 pots
[RouterC-voice-dial-entity1002] match-template 010....
[RouterC-voice-dial-entity1002] line 5/2
[RouterC-voice-dial-entity1002] send-number all
[RouterC-voice-dial-entity1001] quit
[RouterC-voice-dial-entity1002] quit
[RouterC-voice-dial] entity1003 pots
[RouterC-voice-dial-entity1003] match-template 010....
[RouterC-voice-dial-entity1003] line 5/3
[RouterC-voice-dial-entity1003] send-number all
[RouterC-voice-dial-entity1003] return
# Enable hunt group for voice subscriber lines.
<RouterC> system-view
[RouterC] subscriber-line 1/0
[RouterC-subscriber-line1/0] hunt-group enable
[RouterC-subscriber-line1/0] quit
[RouterC] subscriber-line 1/1
[RouterC-subscriber-line1/1] hunt-group enable
[RouterC-subscriber-line1/1] quit
[RouterC] subscriber-line 1/2
[RouterC-subscriber-line1/2] hunt-group enable
[RouterC-subscriber-line1/2] quit
[RouterC] subscriber-line 1/3
[RouterC-subscriber-line1/3] hunt-group enable

Configuring call authority control

Network requirements
As shown in
C, respectively, and they are all connected to the SIP server to allow subscribers to make SIP calls.
When VoIP links fail for some reason, PSTN links that provide backup for VoIP links can be
automatically brought up. Subscribers whose telephone numbers begin with 1100 at place A can
originate calls to place B while subscribers whose telephone number begin with 1200 can originate
calls to both place B and place C.
Figure 35, Router A, Router B, and Router C are located at place A, place B, and place
127