Configuration Procedure; Configuring Fxs Voice Subscriber Line; Configuration Prerequisites; Configuration Guidelines - HP FlexNetwork MSR Series Configuration Manual

Configuration procedure

This section describes the basic functions of voice subscriber lines generated by voice cards.
Configurations specific to a voice subscriber line will be introduced individually.
To complete the basic functions of voice subscriber lines:
Step
1. Enter system view.
2. Enter voice subscriber line
view.
3. Set the expected bandwidth
for the voice subscriber line.
4. Configure a voice
subscriber-line description.
5. Restore the default
configuration of the voice
subscriber line.
6. Tear down the voice
subscriber line.

Configuring FXS voice subscriber line

This section covers prerequisites and procedures for configuring an FXS voice subscriber lines.

Configuration prerequisites

•
The router is equipped with an applicable FXS interface card.
•
The basic functions of FXS voice subscriber lines are configured.

Configuration guidelines

•
To implement the CID function, the VoIP router must be capable to receive calling identity
information in the on-hook state, the hardware and software of PBX must support this service,
and the called telephone must be able to receive and display calling identity information (such
telephones are CID I or CID II class) in the on-hook or conversation state.
•
The call date and time transmitted in data-message format is the router system time. To ensure
correct call time, use the clock command to synchronize router time with the local standard
time.

Configuring CID

Step
1. Enter system view.
Command
system-view
subscriber-line line-number
bandwidth bandwidth-value
description string
default
shutdown
Command
system-view
35
Remarks
N/A
N/A
Optional.
Support for the command
depends on your device model.
Optional.
By default, the description string
of a voice subscriber line is
interface-name+interface.
Optional.
Optional.
Up by default.
Remarks
N/A