Specifying The Destination Address - HP FlexNetwork MSR Series Configuration Manual

Step
5. Bind a SIP trunk
account to the VoIP
voice entity.
6. Bind a SIP server group
to the VoIP voice entity.

Specifying the destination address

Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Enter VoIP voice entity
view.
5. Bind a SIP trunk
account to the VoIP
voice entity.
6. Specifying the
destination address.
Specifying the proxy server used for outbound calls
When a SIP proxy server is used to route SIP messages and audio traffic, the SIP trunk device uses
the SIP server group specified by the proxy command to make calls.
If no registrar is specified by the registrar or registrar server-group command in SIP client view,
the proxy server or SIP server group specified by the proxy command can be used as the registrar.
To specify the proxy server used for outbound calls:
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial
program view.
4. Enter VoIP voice
entity view.
Command
bind sip-trunk account account-index
address sip server-group group-number
Command
system-view
voice-setup
dial-program
entity entity-number voip
bind sip-trunk account account-index
address sip { dns domain-name [ port
port-number ] | ip ip-address [ port
port-number ] }
Command
system-view
voice-setup
dial-program
entity entity-number voip
204
Remarks
By default, no SIP trunk
account is bound to the VoIP
voice entity.
Only an existing SIP trunk
account can be bound to a
VoIP voice entity.
By default, no SIP server
group is bound to the VoIP
voice entity.
A VoIP voice entity can have
only one existing SIP server
group bound to it.
Remarks
N/A
N/A
N/A
N/A
By default, no SIP trunk
account is bound to the VoIP
voice entity.
Only an existing SIP trunk
account can be bound to a
VoIP voice entity.
By default, no destination
address is specified for the
VoIP voice entity.
Remarks
N/A
N/A
N/A
N/A