Enabling Fxo Monitoring; Enabling The Trap Function - HP FlexNetwork MSR Series Configuration Manual

Enabling FXO monitoring

When FXO monitoring is enabled, the router displays the physical state as down for FXO ports that
are loosely connected or not connected at all.
In environments with instable PSTN lines or poor line quality, FXO monitoring might detect that some
lines are disconnected although those line are actually connected, resulting in call failures. To avoid
this problem, disable FXO monitoring.
To enable FXO monitoring:
Step
1. Enter system view.
2. Enter voice view.
3. Enable FXO monitoring.

Enabling the trap function

With the trap function enabled on a call module, when it originates a call, traps with the severity level
warning are generated by the module to inform the important events. These traps will be sent to the
information center of the device. You can set parameters for the information center to determine the
output rules of traps. For more information about the parameter settings of the information center,
see HPE FlexNetwork MSR Router Series Comware 5 Network Management and Monitoring
Configuration Guide.
You can enable the trap function either globally or for an entity. If it is enabled globally, traps will be
generated for all entities. If it is enabled only for a specified entity, traps are generated only for this
entity.
To enable the trap function globally:
Step
1. Enter system view.
2. Enable the trap function
globally.
To enable the trap function for an entity:
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Create a POTS or VoIP voice
entity and enter its view.
5. Enable the trap function for
the entity.
Command
system-view
voice-setup
fxo-monitoring enable
Command
system-view
snmp-agent trap enable voice
dial
Command
system-view
voice-setup
dial-program
entity entity-number { pots |
voip }
dial-trap enable
24
Remarks
N/A
N/A
Optional.
By default, FXO monitoring is
enabled.
Remarks
N/A
Optional.
Disabled by default.
Remarks
N/A
N/A
N/A
N/A
Optional.
Disabled by default.