HP FlexNetwork MSR Series Configuration Manual page 131

Step
8. Exit voice number-substitute
view and enter voice dial
program view.
9. Enter voice entity view.
10. Bind a number substitution
rule list to a voice entity.
To configure number substitution for a voice subscriber line:
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Create a number substitution
rule list and enter voice
number-substitute view.
5. Configure a dot-match rule.
6. Configure a number
substitution rule.
7. Configure the preferred
number substitution rule.
8. Exit voice number-substitute
view and enter voice dial
program view.
9. Exit voice dial program view
and enter voice view.
10. Exit voice view and enter
system view.
11. Enter voice subscriber line
view.
12. Configure a number
substitution rule list for a
subscriber line.
IMPORTANT:
Whatever number substitution mode is configured, the voice gateway performs number substitution
only once on a given number.
Command
quit
entity entity-number { pots | vofr
| voip }
substitute { called | calling }
list-number
Command
system-view
voice-setup
dial-program
number-substitute list-number
dot-match { end-only | left-right
| right-left }
rule rule-tag input-number
output-number [ number-type
input-number-type
output-number-type |
numbering-plan
input-numbering-plan
output-numbering-plan ] *
first-rule rule-number
quit
quit
quit
subscriber-line line-number
substitute { called | calling }
list-number
118
Remarks
N/A
N/A
Optional.
By default, no number substitution
rule list is bound to a voice entity.
Remarks
N/A
N/A
N/A
N/A
Optional.
By default, the dot match rule is
end-only.
Optional.
By default, no number substitution
rule is configured.
Optional.
By default, the preferred number
substitution rule is not configured.
N/A
N/A
N/A
N/A
Optional.
By default, no number substitution
rule list is configured for a
subscriber line.