Displaying And Maintaining Sip Uas - HP FlexNetwork MSR Series Configuration Manual

Hide thumbs Also See for FlexNetwork MSR Series:
Table of Contents

Advertisement

When you configure VRF-aware SIP, follow these restrictions and guidelines:
Configure this feature when no SIP services are running. This feature takes effect on all SIP
services such as SIP calling, registration, and subscription.
To use SIP source binding, the VPN instance associated with the source interface must be the
same as the VPN instance specified in this task.
To configure VRF-aware SIP:
Step
1.
Enter system view.
2.
Enter voice view.
3.
Specify a VPN instance for
SIP.

Displaying and maintaining SIP UAs

Task
Display all call statistics of the SIP UA.
Display information about SIP connections
over a specific transport layer protocol.
Display the registration state of the SIP UA.
Display the PSTN release cause code to SIP
status code mappings or the SIP status code
to PSTN release cause code mappings.
Display ENUM translation rule group
configuration.
Display DNS dynamic cache information.
Display SIP DNS records.
Display the temporarily saved SIP user
identifications and the mapping information of
the users' contact addresses.
Clear all call statistics of the SIP UA
Clear a specified SIP connection over a
specific transport layer protocol.
Command
system-view
voice-setup
vpn-instance vpn-instance-name
Command
display voice sip
call-statistics [ | { begin |
exclude | include }
regular-expression ]
display voice sip connection
{ tcp | tls } [ | { begin | exclude |
include } regular-expression ]
display voice sip
register-state [ | { begin |
exclude | include }
regular-expression ]
display voice sip
reason-mapping { pstn-sip |
sip-pstn } [ | { begin | exclude |
include } regular-expression ]
display voice enum-group { all
| mark group-number } [ |
{ begin | exclude | include }
regular-expression ]
display dns host { naptr | srv }
[ | { begin | exclude | include }
regular-expression ]
display voice sip dns-record
[ | { begin | exclude | include }
regular-expression ]
display voice sip
dynamic-contact-address [ |
{ begin | exclude | include }
regular-expression ]
reset voice sip statistics
reset voice sip connection
{ tcp | tls } id conn-id
160
Remarks
N/A
N/A
Optional.
By default, no VPN instance is
specified for SIP.
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.
Available in user view.

Advertisement

Table of Contents
loading

Table of Contents