Configuring Time Adjustment Function - HP FlexNetwork MSR Series Configuration Manual

Step
3. Set the input gain on the
voice interface.
4. Set the output gain on the
voice interface.
IMPORTANT:
Gain adjustment might lead to call failures. Hewlett Packard Enterprise recommends not adjusting
the gain. If necessary, make sure you understand the impact of the adjustment on your call before
you adjusting the gain.
MoH/Paging voice subscriber line
To configure the gain adjustment function on the music on hold (MoH) or paging voice subscriber
line:
Step
1. Enter system view.
2. Enter voice subscriber line
view.
3. Set the input gain on the
voice interface.
4. Set the output gain on the
voice interface.
5. Mute the audio interface.
IMPORTANT:
• Setting gains might decrease the quality of the input/output audio. Hewlett Packard Enterprise
recommends not adjusting the gain. If necessary, make sure you understand the impact of the
adjustment before you adjusting the gain.
• An audio interface that is muted with the audio-mute command cannot transmit data.

Configuring time adjustment function

Step
1. Enter system view.
2. Enter voice subscriber line
view.
Command
receive gain value
transmit gain value
Command
system-view
subscriber-line line-number
audio-input-gain value
audio-output-gain value
audio-mute
Command
system-view
subscriber-line line-number
51
Remarks...
Optional.
The default is 0 dB.
Optional.
The default is 0 dB.
Remarks...
N/A
N/A
Optional.
The default is 27.5 dB.
This command is only applicable
to the MoH voice subscriber line.
Optional.
The default is -10.0 dB.
This command is only applicable
to the paging voice subscriber
line.
Optional.
By default, an audio interface is
not muted.
This command is only applicable
to the MoH/paging voice
subscriber line.
Remarks
N/A
N/A