Call Services Configuration Examples - HP FlexNetwork MSR Series Configuration Manual

Hide thumbs Also See for FlexNetwork MSR Series:
Table of Contents

Advertisement

Call services configuration examples

This section provides call services configuration examples.
Call waiting
Network requirements
As shown in
call with Telephone B, and the call will not be rejected. Just like a normal call, the subscriber at
Telephone C will hear ringback tones, while the subscriber at Telephone A will hear call waiting tones,
as a reminder that another call is waiting on the line.
Figure 71 Network diagram
1000
Telephone A
Configuration procedure
Before performing the following configuration, make sure that Router A, Router B and Router C are
routable to each other.
1.
Configure Router A:
# Configure voice entities.
<RouterA> system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] entity 2000 voip
[RouterA-voice-dial-entity2000] address sip ip 10.1.1.2
[RouterA-voice-dial-entity2000] match-template 2000
[RouterA-voice-dial-entity2000] quit
[RouterA-voice-dial] entity 3000 voip
[RouterA-voice-dial-entity3000] address sip ip 20.1.1.2
[RouterA-voice-dial-entity3000] match-template 3000
[RouterA-voice-dial-entity3000] quit
[RouterA-voice-dial] entity 1000 pots
[RouterA-voice-dial-entity1000] line 1/0
[RouterA-voice-dial-entity1000] match-template 1000
[RouterA-voice-dial-entity1000] return
# Enable call waiting.
<RouterA> system-view
[RouterA] subscriber-line 1/0
[RouterA-subscriber-line1/0] call-waiting enable
Figure
71, place a call from Telephone C to Telephone A which is already engaged in a
Router A
Eth1/1
10.1.1.1/24
10.1.1.2/24
Router B
Eth1/1
20.1.1.2/24
Eth1/2
Eth1/1
20.1.1.1/24
2000
Telephone B
249
Router C
3000
Telephone C

Advertisement

Table of Contents
loading

Table of Contents