Configuring Registration Timers For A Sip Trunk Account - HP FlexNetwork MSR Series Configuration Manual

Step
5. Assign the host
username allocated
by the ITSP to the SIP
trunk account.
6. Assign the host name
allocated by the ITSP
to the SIP trunk
account.
7. Associate the SIP
trunk account with a
SIP server group for
registration.
8. Configure the
authentication
username and
password for the SIP
trunk account.
9. Enable the
registration function
for the SIP trunk
account.

Configuring registration timers for a SIP trunk account

For more information about the registration timers, see
Configuring call routes for outbound calls
When a SIP trunk account on the private network needs to call an external user, you need to first bind
the SIP trunk account to a VoIP voice entity, and then configure call routes using one of the following
three methods:
Binding a SIP server group to the VoIP voice entity
•
Specifying the destination address
•
Specifying the proxy server used for outbound calls
•
Binding a SIP server group to the VoIP voice entity
After binding a SIP trunk account to a VoIP voice entity, bind a SIP server group to the same VoIP
voice entity to make the SIP trunk account use the SIP server group to place calls.
To bind a SIP server group to the VoIP voice entity:
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Enter VoIP voice entity
view.
Command
assign contact-user user-name
assign host-name host-name
registrar server-group
group-number [ expires time ]
user username password { simple
| cipher } password
register enable
Command
system-view
voice-setup
dial-program
entity entity-number voip
203
Remarks
Not assigned by default.
Optional.
Not assigned by default.
Not associated by default.
Optional.
Not configured by default.
Disabled by default.
"Configuring registration
Remarks
N/A
N/A
N/A
N/A
timers."