Displaying And Maintaining Dial Plan Configuration; Dial Plan Configuration Examples; Configuring Number Substitution - HP FlexNetwork MSR Series Configuration Manual

Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program
view.
4. Enter POTS entity view.
5. Configure a dial prefix.
6. Bind a number template to
the local voice entity.

Displaying and maintaining dial plan configuration

Task
Display information of the
configured number substitution
rule lists.
Display information of the
configured subscriber groups.

Dial plan configuration examples

This section provides dial plan configuration examples.

Configuring number substitution

Network requirements
As shown in
The following requirements must be met:
•
These two local telephony networks communicate through two voice gateways. Subscribers in
one PBX network can make ordinary calls to remote subscribers in the other PBX network over
a VoIP network.
•
Configure two FXO trunk lines between each router and its PBX and enable hunt group to
realize trunk line backup.
•
There are a financial department, market department, and sales department at both place A
(area code 021) and place B (area code 010). A department at place A only needs to know the
telephone numbers of the local departments and the area code of place B when calling a
department at place B. For example, the financial department at place B can dial 3366 to call
the local market department. The financial department at place B can dial 0103366 to call the
market department at place A, and the caller identification displayed on the terminal at place A
is 0211234, that is, the area code of place B + telephone number of the financial department at
place B.
Figure 32, a PBX to forms a local telephony network at place A and place B respectively.
Command
system-view
voice-setup
dial-program
entity entity-number pots
dial-prefix string
match-template match-string
Command
display voice
number-substitute [ list-tag ] [ |
{ begin | exclude | include }
regular-expression ]
display voice subscriber-group
{ subscriber-group-list-tag | all } [ |
{ begin | exclude | include }
regular-expression ]
120
Remarks
N/A
N/A
N/A
N/A
No dial prefix by default.
By default, no number template is
bound to the local or trunk voice
subscriber line.
Remarks
Available in any view.