HP FlexNetwork MSR Series Configuration Manual page 334

# Enter interface Serial 2/0 view and configure the encapsulation format and interface type.
[RouterA] interface serial 2/0
[RouterA-Serial2/0] link-protocol fr ietf
[RouterA-Serial2/0] fr interface-type dce
# Enter DLCI 100 view and set the frame relay class to VoFR for DLCI.
[RouterA-Serial2/0] fr dlci 100
[RouterA-fr-dlci-Serial2/0-100] fr-class vofr
# Specify the call control protocol to be used on DLCI 100 as Huawei-compatible (DCE).
[RouterA-fr-dlci-Serial2/0-100] vofr huawei-compatible dce
[RouterA-fr-dlci-Serial2/0-100] quit
[RouterA-Serial2/0] quit
# Configure the VoFR entity (0755-2001).
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] entity 0755 vofr
[RouterA-voice-dial-entity755] match-template 07552001
[RouterA-voice-dial-entity755] address vofr-dynamic serial 2/0 100
[RouterA-voice-dial-entity755] quit
# Configure the local POTS entity (0101001).
[RouterA-voice-dial] entity 1001 pots
[RouterA-voice-dial-entity1001] match-template 0101001
[RouterA-voice-dial-entity1001] line 3/0
2. Configure Router B:
# Create a new frame relay class VoFR and set the maximum amount of voice bandwidth.
<RouterB> system-view
[RouterB] fr class vofr
[RouterB-fr-class-vofr] voice bandwidth 32000 reserved
[RouterB-fr-class-vofr] quit
# Enter interface Serial 1/0 view and configure the encapsulation format.
[RouterB] interface serial 1/0
[RouterB-Serial1/0] link-protocol fr ietf
# Enter DLCI 100 view and set the frame relay class to VoFR for DLCI.
[RouterB-Serial1/0] fr dlci 100
[RouterB-fr-dlci-Serial1/0-100] fr-class vofr
# Specify the call control protocol to be used by DLCI 100 as Huawei-compatible (DTE).
[RouterB-fr-dlci-Serial1/0-100] vofr huawei-compatible dte
[RouterB-fr-dlci-Serial1/0-100] quit
[RouterB-Serial1/0] quit
# Configure the VoFR entity (0101001).
[RouterB] voice-setup
[RouterB-voice] dial-program
[RouterB-voice-dial] entity 010 vofr
[RouterB-voice-dial-entity10] match-template 0101001
[RouterB-voice-dial-entity10] address vofr-dynamic serial 1/0 100
[RouterB-voice-dial-entity10] quit
# Configure the local POTS entity (07552001).
[RouterB-voice-dial] entity 2001 pots
321