Configuration Task List; Configuring Call Progress Tones; Configuration Prerequisites; Specifying The Call Progress Tones Of A Country - HP FlexNetwork MSR Series Configuration Manual

•
MSR900.
•
MSR93X.
•
MSR1000.
•
MSR30-11E.
•
MSR30-11F.

Configuration task list

Task

Configuring call progress tones

Configuring basic functions
Configuring FXS voice subscriber line
Configuring FXO voice subscriber line
Binding an FXS voice subscriber line to an FXO voice subscriber line
Configuring E&M voice subscriber line
Configuring DTMF
Configuring options related to dial plan
Configuring adjustment functions
Rebooting a voice card
Configuring global default parameters for voice subscriber lines
Configuring call progress tones
This section covers how to specify and configure the call progress tones of a country.

Configuration prerequisites

The router is equipped with an applicable FXS, FXO, E&M, BSV, VE1, or VT1 voice interface card.

Specifying the call progress tones of a country

Step
1. Enter system view.
2. Enter voice view.
3. Specify the call progress
tones of a country.
Command
system-view
voice-setup
cptone country-type locale
33
Remarks
Required.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Remarks
N/A
N/A
By default, the call progress tones
of China are specified.