Enabling Call Forwarding - HP FlexNetwork MSR Series Configuration Manual

Step
2. Enter voice view.
3. Enter SIP client view.
4. Enable address hiding.

Enabling call forwarding

Usually, the SIP trunk device transparently transfers the SIP messages carrying call forwarding
information to the endpoints, and the endpoints perform the call forwarding. However, some
endpoints do not support call forwarding information. In this case, enable the call forwarding function
on the SIP trunk device.
With this function enabled, the SIP trunk device processes call forwarding information without
notifying the calling parties, and does not transfer call forwarding information to the endpoints.
To enable call forwarding:
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program view.
4. Enter VoIP voice entity view.
5. Enable call forwarding.
Enabling call transfer
Usually, the SIP trunk device transparently transfers the SIP messages carrying call transfer
information to the endpoints, and the endpoints perform the call transfer. However, some endpoints
do not support call transfer information. In this case, enable the call transfer function on the SIP trunk
device.
With this function enabled, the SIP trunk device processes call transfer information without notifying
the calling parties, and does not send call transfer information to the endpoints.
To enable call transfer:
Step
1. Enter system view.
2. Enter voice view.
3. Enter voice dial program view.
4. Enter VoIP voice entity view.
Command
voice-setup
sip
address-hiding enable
Command
system-view
voice-setup
dial-program
entity entity-number voip
supplementary−service sip
call-forwarding
Command
system-view
voice-setup
dial-program
entity entity-number voip
209
Remarks
N/A
N/A
Optional.
By default, address hiding
for SIP-to-SIP calls is
disabled.
Remarks
N/A
N/A
N/A
N/A
Optional.
By default, this feature is
disabled.
Remarks
N/A
N/A
N/A
N/A