Configuring User Information - HP FlexNetwork MSR Series Configuration Manual

Step
7. Enable the local SIP
server.

Configuring user information

Step
1. Enter system view.
2. Enter voice view.
3. Enter SIP server view.
4. Create a user to be
registered with and enter
register user view.
5. Configure a DN for the user.
6. Configure authentication
information for the user.
7. Configure the maximum
registration interval.
Specifying a trusted node
A trusted node can directly originate calls without being authenticated by the local SIP server. You do
not need to configure user information for the number of the trusted node on the local SIP server.
To specify a trusted node:
Step
1. Enter system view.
2. Enter voice view.
3. Enter SIP server view.
Command
server enable
Command
system-view
voice-setup
sip-server
register-user tag
number party-number
authentication username
username password { cipher |
simple } password
expires time-interval
Command
system-view
voice-setup
sip-server
180
Remarks
By default, the local SIP server is
disabled.
The functions of the local SIP server can
take effect after you execute this
command.
Remarks
N/A
N/A
N/A
By default, no user is created to
be registered.
By default, no DN is configured for
the user.
Optional.
By default, no authentication
information is configured for the
user.
When accepting registrations and
calls from the user, the local SIP
server needs to check the user's
authentication information for
validity. The user can register with
the local SIP server to originate
calls only after passing
authentication.
Optional.
By default, the maximum
registration interval is configured
with the server-bind ipv4
command.
Remarks
N/A
N/A
N/A