Monitor Link configuration commands
display monitor-link group
Use display monitor-link group to display monitor link group information.
Syntax
display monitor-link group { group-id | all } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
group-id: Monitor link group ID, which ranges from 1 to 16.
all: Displays information about all monitor link groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about monitor link group 1.
<Sysname> display monitor-link group 1
Monitor link group 1 information:
Group status: DOWN
Last-up-time: 16:37:20 2009/4/21
Last-down-time: 16:38:26 2009/4/21
Member
------------------------------------------
GigabitEthernet1/0/1
GigabitEthernet1/0/2
Table 29 Command output
Field
Monitor link group 1 information
Group status
Last-up-time
Last-down-time
Role
Status
UPLINK
DOWN
DOWNLINK DOWN
Description
Information about monitor link group 1.
Monitor link group state, which can be up or down.
Last time when the monitor link group was up.
Last time when the monitor link group was down.
94